Guide on How to Flash Infinix Hot 11 or 11s with Flash Tool, Firmware or Stock ROM

After the launch of Infinix Hot 11 or 11s on — we shared content here on APKMayor about the Hot 11 or 11s full specifications, its amazing features and purchase price in online and offline stores for lovers of Infinix. In another post, we talk about how users can carry out a do-it-yourself (DIY) guide on how to soft reset or hard reset the Hot 11 or 11s as the case may be when the need arises like if it starts to become unresponsive or before gifting it out to a friend or family for use.



Now as earlier explained in our “Essential App issues and Fixings” and “Quick Fixing Guide” that shows steps for the camera, wifi, Bluetooth, etc. You should note that not all issues on your Infinix Hot 11 or 11s require flashing. We strongly advise that for phones still under warrantee the users should first locate the nearest service center for them to troubleshoot, fix or replace as the case may be. But if you have tried that already and it failed then, you should probably opt-in for formatting in this case I will show you how to use Android Flash Tool to format your Hot 11 or 11s.



Just before you follow the tips below to upgrade or downgrade your Infinix Hot 11 or 11s. Do a backup of your personal data:

Steps on how to flash Infinix Hot 11 or 11s with SP Flash Tool:

First of all, visit our Firmware page and download a stock ROM for your:

  • Infinix Hot 11 or 11s

Note: You will need to place your phone on charge with a working charger till you are sure it has charged above 50 percent before your formatting process commences else your phone might not wake up even after formatting.
Next, you will have to follow the instruction of using a Smart Phone Flash Tool as explained here below.

Step 1: Download and install MTK drivers.

Step 2: Or you download and install MT65XX VCOM drivers (Preferable) from here.

Step 3: Download SP Flash tool (latest version is preferable) from here.

Step 4: Download the stock ROM of the device you want to flash.

Step 5: Extract SP flash Tool and open the folder, now run the SP flash tool as administrator.

Step 6: Now extract the stock ROM you downloaded and go back to SP flash tool.

Step 7: Now click on scatter-loading button on the SP flash tool and you need to go to the stock ROM the folder you extracted.

Step 8: You will see a scatter file in there, double click on it to select it (it will look like MT6572_Android_scatter). The number may be different.

Step 9: Now untick preloader (this is not required unless the device is completely dead.

Step 10: And also make sure you untick DSP_BL if found on the list that will be shown in the SP flash tool.

Step 11: Now you need to click the Download button and power off the Infinix Hot 11 or 11s, remove the battery ( if the battery is inbuilt power off the phone and waits for 10 minutes).

Step 12: Now connect the device to the computer with the USB and wait for the SP flash tool to detect it.

Step 13: Immediately the Infinix Hot 11 or 11s has been detected a red line will be at the bottom then followed by a yellow line.

Step 14: After the flashing is done or completed you will see a big green tick shown on the screen.

Step 15: Now power on the Infinix Hot 11 or 11s and wait for it to boot, it might take minutes if it does not boot up then remove the battery, if it’s an inbuilt battery, press the power button for 15 seconds and the Infinix Hot 11 or 11s will power off or restart.

Tips to Remember:

This update is meant for Infinix Hot 11 or 11s users only.

Apkmayor is in no way responsible for any damage you might have on your Infinix Hot 11 or 11s while installing the update.

The usual upgrade steps require the use of a PC or Laptop to carry out the firmware flashing.

Ensure that you have updated and working USB drivers installed.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x