After the launch of Xiaomi 11i or 11i HyperCharge on — we shared content here on APKMayor about the 11i or 11i HyperCharge full specifications, its amazing features and purchase price in online and offline stores for lovers of Xiaomi. In another post, we talk about how users can carry out a do-it-yourself (DIY) guide on how to soft reset or hard reset the 11i or 11i HyperCharge as the case may be when the need arises like if it starts to become unresponsive or before gifting it out to a friend or family for use.
Now as earlier explained in our “Essential App issues and Fixings” and “Quick Fixing Guide” that shows steps for the camera, wifi, Bluetooth, etc. You should note that not all issues on your Xiaomi 11i or 11i HyperCharge require flashing. We strongly advise that for phones still under warrantee the users should first locate the nearest service center for them to troubleshoot, fix or replace as the case may be. But if you have tried that already and it failed then, you should probably opt-in for formatting in this case I will show you how to use Android Flash Tool to format your 11i or 11i HyperCharge.
Easy Steps on how to flash Xiaomi 11i or 11i HyperCharge Back to Its Factory State:
Step 1: Download and install MTK drivers.
Step 2: Or you download and install MT65XX VCOM drivers (Preferable) from here.
Step 3: Download Flash tool (the latest version is preferable) from here.
Step 4: Download the stock ROM of the device you want to flash or unbrick from here.
Step 5: Extract Flash Tool and open the folder, now run the Flash tool as administrator.
Step 6: Now extract the stock ROM you downloaded and go back to Flash tool.
Step 7: Now click on scatter-loading button on the Flash tool and you need to go to the stock ROM folder you extracted.
Step 8: You will see a scatter file in there, double click on it to select it (it will look like MT6572_Android_scatter). The number may be different.
Step 9: Now untick preloader (this is not required unless the device is completely dead.
Step 10: And also make sure you untick DSP_BL if found on the list that will be shown in the Flash tools.
Step 11: Now you need to click the Download button and power off the device, remove the battery ( if the battery is inbuilt power off the phone and waits for 10 minutes).
Step 12: Now connect the device to the computer with the USB and wait for the Flash tool to detect it.
Step 13: Immediately the phone has been detected a red line will be at the bottom then followed by a yellow line.
Step 14: After the flashing is done or completed you will see a big green tick shown on the screen.
Step 15: Now power on the phone and wait for it to boot, it might take minutes if it does not boot up then remove the battery, if it’s an inbuilt battery, press the power button for 15 seconds and the phone will power off or restart.
Just before you follow the tips below to upgrade or downgrade your Xiaomi 11i or 11i HyperCharge. Do a backup of your personal data:
Tips to Remember:
- This update is meant for Xiaomi 11i or 11i HyperCharge users only.
- APKMayor is in no way responsible for any damage you might have on your Xiaomi 11i or 11i HyperCharge while installing the update.
- The usual upgrade steps require the use of a PC or Laptop to carry out the firmware flashing.
- Ensure that you have updated and working USB drivers installed.
To request a download link, simply indicate in the comment box below.